GREENDREDGE



Designation
BIOGREASE LL-EP 2
Prod. no.
72888
Visc.
Properties/applications

Fully synthetic, readily biodegradable EP universal grease based on natuaral resources. Excellent load-bearing properties. Good water resistance.
Applications: For exposed universal applications

Swedish Standard
US EPA VIDA/VGP 2013

Performance grade

–30 °C bis/to/à 120 °C



Approvals:

MAN Energy Solutions - FPP propeller caps 
Mecklenburger Metallguss GmbH (MMG) - Propeller und -kappen
Viper WRL - WRL Systems (Wire Rope Lubricator)
Wärtsilä - NBR, FR und BIO SEAL Material


more information ›
Designation
BIOMOT LE-X
Prod. no.
07410
Visc.
5W-30
Properties/applications

Fully synthetic environment-considerate multigrade oil for extremely heavy-duty diesel engines with long oil change intervals. Environmental compatibility:
Biodegradability acc. to OECD 301 B; > 60%, Water hazard classifications acc. to AwSV: WGK 1

Performance grade

Spezifikationen:
ACEA E6, E7, E9 (angelehnt)
API CJ-4, CK-4.

Leistungsniveau: 
CAT ECF-3
MAN M 3477, M 3677
Mercedes-Benz 228.51
MTU Ölkategorie 3.1
Renault RLD-3
Volvo VDS-4


more information ›
Designation
BIOMOT LX
Prod. no.
07350
Visc.
10W/40
Properties/applications
Fully synthetic environment-considerate lowSAPS oil for modern diesel aggregates. Particularly suitable for diesel engines with exhaust treatment systems.
Biodegradability: OECD 301 B; > 60%.
Performance grade

more information ›
Designation
BIOTRACK E
Prod. no.
54918
54926
54930
Visc.
68
320
700
Properties/applications
Environment-considerate oil for lost-oil lubrication systems, based on renewable ester. Good emergency running properties even under thin-film conditions.
Applications: flanged wheels, track switches and gear drive chains, hydraulic demolition hammer picks and chisels, wire ropes and cables.
Biodegradability: OECD 301 B; > 60%. EPA Vessel General Permit 2013.
Performance grade


Approvals: Gürdesan.
Macor Marine (54930).
more information ›
Designation
HLP SYNTH
Prod. no.
35120
35130
35140
35150
35160
Visc.
15
22
32
46
68
Properties/applications

Fully synthetic, high-performance and zinc-free EAL for hydraulic systems. Based on saturated synthetic esters. Enables much longer oil change intervals, «lifetime filling», no deposits.
Applications: Hydraulic oil for most hydraulic systems in earth-moving, dredging, marine, offshore, forestry, industrial as well as for the hydropower sector.
Biodegradability: OECD 301 B > 60%. Japan Environment Association Eco Mark.

Performance grade

ASTM D 943 (trockener TOST-Test) >5000h 
ASTM D 2070 (mod. 1680 h)
FZG Test A/8.3/90 Laststufe 12
ISO 15380/HEES. (35020-35060)
Vickers V104 C



Approvals:

Zahlreiche Hersteller-Freigaben vorliegend/approved by numerous manufacturers/nombreuses homologations de fabricants disponibles.


more information ›
Designation
HLP SYNTH E
Prod. no.
35625
35630
35635
35640
35645
Visc.
15
22
32
46
68
Properties/applications

Fully synthetic, high-performance and zinc-free EAL for hydraulic systems. Based on saturated synthetic esters.
For hydraulic applications where hydraulic fluids complying with the EU Ecolabel are prescribed.
Biodegradability: OECD 301 B > 60%, EU Eco-Label. Swedish Standard SS 15 54 34. USDA Bio Preferred. US EPA VIDA/VGP 2013

Performance grade

ASTM D 8029
ISO 15 380 HEES.

 



Approvals:

Airo by TIGIEFFE s.r.l.
Fincantieri S.p.A.
Macor Marine.
Sequani Meccanica.
Terex Demag.
Tre Emme.


more information ›
Designation
MARGEAR
Prod. no.
28518
28520
28522
28524
Visc.
68
100
150
220
Properties/applications

Fully synthetic and environmentally friendly high performance gear oil for marine appications. Based on renewable saturated synthetic esters with excellent oxidation resistence. CO2 reduction due to extended oil-change and service intervals.
Application: Gear boxes in marine propulsion systems, roller and slide bearings.
Biodegradability according to OECD 301 B: > 60%

US EPA VIDA/VGP 2013
EU Ecolabel - DE/027/289 (28518, 28520, 28522)

Performance grade

DIN 51 502/CLP E,

*51 517/CLP.



Approvals:

Gürdesan.
James Walker –
Bi-O-Lion.
Kawasaki, Side Thruster.
Kemel.
Kumera, Gears.
Lagersmit – FKM-EAL.
Ortlinghaus,
ON 9.2.10.
SKF Marine GbmH –
Simplex-Compact Seals
with VitonBio (FKM).
Tenute, NBR-MN002,
HNBR-MH007.
Wärtsilä, Bio-Seals.


more information ›
Designation
MARGREASE W EP 0
Prod. no.
72922
Visc.
Properties/applications

Fully synthetic, readily biodegradable EP fluid grease for injection systems. Outstanding anti-wear and anti-corrosion properties. Good water wash-out resistance and mechanical stability.
Applications: Rudders, Stabilizers, Controllable pitch propellers

Swedish Standard
US EPA VIDA/VGP 2013

Performance grade

–40 °C bis/to/à 100 °C


more information ›
Designation
STELLA MARIS
Prod. no.
28445
28450
28455
28460
28465
Visc.
68
100
150
220
320
Properties/applications

Fully synthetic stern tube lubricant, biodegradable.
Applications: stern tubes as per EPA requirements for marine lubricants.
Biodegradability: OECD 301 B; > 60%. EN 16807, EPA Vessel General Permit 2013, EU Ecolabel. RINA Green Plus.

Performance grade


Approvals:

ABS Type Approval.
Aegir-Marine.
Gürdesan.
James Walker.
Kemel.
Lagersmit.
SKF Blohm + Voss Industries.
Versitec-Marine - Vanguard Seals.
Wärtsilä Bio-Seals.


more information ›

The Merits of Using Bio Oils over the Mineral-Based Oils

PANOLIN is a frontrunner as a producer of bio oil-products. They are fully synthetic, meeting highest requirements. Some bio oils are made from renewable resources and are biodegradable. These bio oils are useful in their natural form, but adding appropriate additives enhances the performance in different settings. PANOLIN lubricants stand out with a full range of bio oils to versatile applications and cost advantages through longevity.

Superior Lubricity of Bio Lubricants

The bio-based oil has higher lubricity than that of the mineral-based lubricant. For instance, the viscosity index of the bio oil can be as high as 223, while that of most mineral based lubricants ranges between 90 and 100. The oil that has high viscosity is more stable in fluctuating temperature conditions than the oil with a low viscosity index. The viscosity factor explains why bio oils perform better under pressure and temperature.

ISO 15380

We refer to hydraulic fluid as the "lifeblood" of hydraulic systems because it not only transmits power, but also transmits heat to cool components, maintains pH, as well as removes water, oxygen and other contaminants. It means, choosing a high-quality hydraulic fluid is an important decision, and one that should not be rushed. In the past, manufacturers have relied on international standards such as ISO6743-4, ISO 15380, ISO12922 and DIN 51524.

ISO 15380:2016 specifies the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems, particularly hydraulic fluid power systems. The purpose of this International Standard is to provide guidance for suppliers and users of environmentally acceptable hydraulic fluids and for the direction of original equipment manufacturers of hydraulic systems. Concerning the groups contained in ISO 6743-4, only four types of environmentally compatible hydraulic fluid are covered by this International Standard. These are the HETG, HEPG, HEES, and HEPR categories.

As a test method for the biological degradability, the test methods have proven themselves according to OECD 301x internationally established. These test procedures are also accompanied in the current standard ISO 15380 and are also available for the common eco-labels such as EuroMargerite or Blue Angel are the main award criteria.

Bio Oils are More Environmentally-Friendly

The bio oil lubricant is biodegradable, meaning that it has a less negative impact on the environment. In case of oil leakages and spillage, the bio-based fluids are readily biodegraded, unlike the mineral-based that persist in the environment and potentially harm the plants and animals in the affected areas. On the same note, the biodegradable oils are renewable, meaning that they are more environmentally responsible than the mineral oils which are made from non-renewable resources. The bio-based oil lubricant is more sustainable than the mineral oils in the long term.

PANOLIN focuses on sustainability and eco friendliness. All EALs are tested on their impact on the environment. The lubricants from PANOLIN are all awarded labels for eco friendliness that officially prove the fulfilment of highest environmental standards. On top of that, PANOLIN oils stand out with longevity, cost savings and are improving the operation of the machinery.