GREENMARINE



Désignation
ATLANTIS
No. de réf.
36054
36060
36062
36065
Visc.
5
15
22
N 32
Propriétés/applications

Liquide hydraulique entièrement synthétique, exempt de zinc, respectueux de l’environnement, à base d’ester saturé.Conçu spécialement pour des systèmes hydrauliques offshore et en haute mer.
Biodégradabilité: selon OCDE 301 B; > 60%. Cefas, UK : OCNS Group A. Ce produit contient une ou plusieurs substances substituables, Miljøstyrelsen (Danemark), SODM (Pays-Bas), RINA Green Plus.



Code de conteneur: C, F, T, KA
Niveau de performance


Approbations:

ABS Type Approval
Damcos A/S (Emerson Process Management).
Framo - an Alfa Laval brand (36065)


plus d’information ›
Désignation
BIOGREASE LL-EP 2
No. de réf.
72888
Visc.
Propriétés/applications

Fully synthetic, readily biodegradable EP universal grease based on natuaral resources. Excellent load-bearing properties. Good water resistance.
Applications: For exposed universal applications

Swedish Standard
US EPA VIDA/VGP 2013



Code de conteneur: F, T, KA
Niveau de performance

–30 °C bis/to/à 120 °C



Approbations:

MAN Energy Solutions - FPP propeller caps 
Mecklenburger Metallguss GmbH (MMG) - Propeller und -kappen
Viper WRL - WRL Systems (Wire Rope Lubricator)
Wärtsilä - NBR, FR und BIO SEAL Material


plus d’information ›
Désignation
BIOGREASE W EP 1
No. de réf.
72545
Visc.
Propriétés/applications

Fully synthetic, readily biodegradable EP universal grease. Excellent load-bearing properties. Very good water resistance and good mechanical stability
Applications: For exposed applications

Environmental compatibility: EU Ecolabel, Swedish Standard (pending), US EPA VIDA VGP



Code de conteneur: F, T, KA
Niveau de performance

–40 °C bis/to 100 °C


plus d’information ›
Désignation
BIOTRACK E
No. de réf.
54918
54926
54930
Visc.
68
320
700
Propriétés/applications
Huile respectueuse de l’environnement (ECL) pour systèmes de lubrification à huile perdue, à base d’esters renouvelables. Bonnes propriétés dans les situations critiques même en couche mince.
Applications : roues à boudins, aiguillages et chaînes à engrenages, marteaux-piqueurs et burins hydrauliques, cordes métalliques et câbles.
Biodégradabilité : OCDE 301 B ; > 60 %. VGP (Vessel General Permit) de l’EPA 2013.


Code de conteneur: C, F, T, KA
Niveau de performance


Approbations: Gürdesan.
Macor Marine (54930).
plus d’information ›
Désignation
HLP SYNTH
No. de réf.
35120
35130
35140
35150
35160
Visc.
15
22
32
46
68
Propriétés/applications

Lubrifiant synthétique acceptable sur le plan environnemental (EAL), haute performance et sans zinc pour systèmes hydrauliques. À base d’esters synthétiques saturés. Permet d’allonger les intervalles de vidange « remplissage longue durée », sans dépôts.
Applications : huile hydraulique pour systèmes hydrauliques - engins de terrassement, dragage, applications marines et offshore, forestières et industrielles, et secteur hydroélectrique.
Biodégrabilité : OCDE 301 B > 60 %. Écolabel d’une association environnementale japonaise.



Code de conteneur: C, F, T, KA
Niveau de performance

ASTM D 943 (trockener TOST-Test) >5000h 
ASTM D 2070 (mod. 1680 h)
FZG Test A/8.3/90 Laststufe 12
ISO 15380/HEES. (35020-35060)
Vickers V104 C



Approbations:

Zahlreiche Hersteller-Freigaben vorliegend/approved by numerous manufacturers/nombreuses homologations de fabricants disponibles.


plus d’information ›
Désignation
HLP SYNTH E
No. de réf.
35625
35630
35635
35640
35645
Visc.
15
22
32
46
68
Propriétés/applications

Lubrifiant synthétique acceptable sur le plan environnemental (EAL), haute performance et sans zinc pour systèmes hydrauliques. À base d’esters synthétiques saturés.
Pour applications hydrauliques prescrivant des fluides hydrauliques conformes à l’écolabel européen.
Biodégradabilité : OECD 301 B > 60%, EU Eco-Label. Swedish Standard SS 15 54 34. USDA Bio Preferred. US EPA VIDA/VGP 2013



Code de conteneur: C, F, T, KA
Niveau de performance

ASTM D 8029
ISO 15 380 HEES.

 



Approbations:

Airo by TIGIEFFE s.r.l.
Fincantieri S.p.A.
Macor Marine.
Sequani Meccanica.
Terex Demag.
Tre Emme.


plus d’information ›
Désignation
HLP SYNTH ECO
No. de réf.
34910
34912
34914
34916
Visc.
15
22
32
46
Propriétés/applications

Liquide hydraulique haute performance, entièrement synthétique, exempt de zinc, respectueux de l’environnement, à base d’esters saturés combinés avec des additifs spéciaux.
Application: principalement en tant qu’huile hydraulique dans des engins de chantier, tracteurs forestiers et machines industrielles, ainsi que dans constructions hydrauliques en acier.
Biodégradabilité: OCDE 301 B: > 60 %



Code de conteneur: C, F, T, KA
Niveau de performance

FZG A/8.3/90: 11
ISO 15'380/HEES.


plus d’information ›
Désignation
MARGEAR
No. de réf.
28518
28520
28522
28524
Visc.
68
100
150
220
Propriétés/applications

Fully synthetic and environmentally friendly high performance gear oil for marine appications. Based on renewable saturated synthetic esters with excellent oxidation resistence. CO2 reduction due to extended oil-change and service intervals.
Application: Gear boxes in marine propulsion systems, roller and slide bearings.
Biodegradability according to OECD 301 B: > 60%

US EPA VIDA/VGP 2013
EU Ecolabel - DE/027/289 (28518, 28520, 28522)



Code de conteneur: C, F, T, KA
Niveau de performance

DIN 51 502/CLP E,

*51 517/CLP.



Approbations:

Gürdesan.
James Walker –
Bi-O-Lion.
Kawasaki, Side Thruster.
Kemel.
Kumera, Gears.
Lagersmit – FKM-EAL.
Ortlinghaus,
ON 9.2.10.
RM Propulsion
SKF Marine GbmH –
Simplex-Compact Seals
with VitonBio (FKM).
Tenute, NBR-MN002,
HNBR-MH007.
Wärtsilä, Bio-Seals.


plus d’information ›
Désignation
MARGREASE W EP 0
No. de réf.
72922
Visc.
Propriétés/applications

Fully synthetic, readily biodegradable EP fluid grease for injection systems. Outstanding anti-wear and anti-corrosion properties. Good water wash-out resistance and mechanical stability.
Applications: Rudders, Stabilizers, Controllable pitch propellers

Swedish Standard
US EPA VIDA/VGP 2013



Code de conteneur: F, T, KA
Niveau de performance

–40 °C bis/to/à 100 °C


plus d’information ›
Désignation
SPRINT
No. de réf.
34544 34546 34548
Visc.
32
46
68
Propriétés/applications

Lubrifiant hydraulique, rapidement biodégradable - esters synthétiques



Code de conteneur: C, F
Niveau de performance

ASTM D 943 (Trockener TOST Test) > 2000 h
ASTM D8029
EN 16 807
FZG Test A/8.3/90 12. Laststufe
ISO 15 380/HEES
Vickers V104 C


plus d’information ›

Lubricants to the Marine Industry

When the United States Environmental Protection Agency (EPA) announced the Vessel General Permit (VGP) in 2013, a new chapter for PANOLIN began. PANOLIN decided to make the issue of pollution in the seas and oceans to a priority. Even the EU, who historically advocated more environmentally friendly activities in this area, is far behind the USA in its progress.

Globally, water is the most important basic means of sustenance. Pollution of this essential resource is caused almost exclusively by water-based vehicles and from propeller grease, chain or cable lubricants and many other similar components. The U.S. legislation stipulates that all vessels are required to use environmentally compatible lubricants in all parts of the ship that encounter water. Additionally, this legislation applies to all vessels measuring 24 meters or larger which navigate in American waters at three miles from the coast as well as on all American lakes.

There are numerous systems and components in the underwater portion of a vessel affected by this new legislation, such as: the propeller shaft seal, the mechanics in the variable pitch propeller, bow thruster, rudder spindle, pod propulsion and the stabilizers in the machinery of underwater diggers. The lubricants used for all these parts must be «environmentally acceptable lubricants» (EALs), must be quickly biodegradable, may only be minimally toxic and must not be subject to bioaccumulation.

PANOLIN, developed a complete product line which is available in the most important harbors around the world. Because of its pro-
active approach and more than 30 years' experience with quickly biodegradable lubricants, PANOLIN is now in the forefront of this market.

The marine lubricants which are produced by PANOLIN are all certified as ecofriendly. As manufacturer of EALs, PANOLIN attaches great importance on the effects that PANOLIN products have on the environment. Our products are made, meeting highest requirement as far as both eco friendliness and top performance are concerned. PANOLIN marine lubricants are primarily used in the realms of heavy duty in all types of vessels, combining high performance and ecology at the same time.

Using Lubricants in the Sea

All PANOLIN marine lubricants are labelled with national or international environment certificates. Regarding the United States, our EALs are proud to be certified as ecofriendly by the United States Environmental Protection Agency EPA. On top of that, PANOLIN marine lubricants are proven to be biodegradable meaning that they will not have a damaging impact on the marine ecosystem. Both fish and plants are not being harmed in a critical incident of, for example, leakages.

More recently, in January this year, the IMO Polar Code came into force, stating that 'discharge into the sea of oil or oily mixtures from any ship are prohibited', as are chemicals, sewage and garbage, unless meeting stringent controls. Ballast water is also subject to controls to minimize the risk of transfer of invasive species. In keeping with the spirit of the Polar Code, vessel owners must reconsider their use of the current, non-biodegradable, toxic, mineral-based lubricants that contain heavy metals and leave oil slicks. Top-tier fully saturated synthetic ester-based lubricants, such as PANOLIN offers, exhibit very good thermal oxidation resistance and shear stability, have excellent additive solubility and low temperature characteristics, and they meet all the current environmental requirements. With their long performance life and consistency of properties, PANOLIN's fully saturated synthetic esters reduce operational costs by reducing maintenance requirements and enhancing equipment performance and life - and ensure critical pieces of safety equipment are fully operational should the worst happen, in the worst of conditions.

Both biodegradability and environmental acceptability are due to the unique composition of PANOLIN marine lubricants. PANOLIN primarily use synthetic esters, nontoxic components, and environmental considerate material to produce the EALs. Consequently, the biodegradability of PANOLIN marine lubricants is scientifically proven by the OECD 301B test This test states that more than 60% of PANOLIN marine lubricants is biodegraded within 28 days, PANOLIN exceeds this result by far.

Finding a Reliable Marine Lubricant Supplier

Not every lubricant manufacturer is going to carry marine lubricants. Many of them will only carry a select few to find a continuous supplier of marine lubricants that allows them to order. It is important to become familiar with what works best for each type of equipment and get the best marine lubricants that are offered. PANOLIN has large warehouses in over two dozen harbors around the world so that PANOLIN can supply the customers with the appropriate products before they set sail. While numerous EALs on the market are struggling with problems today, PANOLIN has now filled over 350 ships. PANOLIN STELLA MARIS and other lubricants are used in various applications and to this day PANOLIN have not received one single complaint!

Today, the company supplies a range of blue-chip operators including Maersk Line, V Ships, Gener8 and Zim and also provides specialist luboils for dredging majors and ferry operators including Boskalis, DEME, Jan de Nul, Van Oord, Saipem, BC Ferries and the Texas Department of Transportation.